Hiring a Welder? Your Top 8 Questions Answered (Costs, Timelines & What to Ask)
1. How much does welding cost per hour?
Nationally, most welding and fabrication shops charge $75–$150 per hour, with mobile welders (they come to you) typically running $100–$200 per hour plus a trip fee of $30–$100 depending on distance. Almost every pro also has a minimum charge of $150–$300, because setup, safety prep, and travel take time even on a five-minute weld.
Typical project ranges you can use for budgeting:
- Small repair (broken hinge, cracked bracket, trailer tongue): $150–$400
- Handrail or stair railing repair: $200–$600
- New custom railing: $60–$150 per linear foot installed
- Driveway gate repair: $250–$800; custom gate fabrication: $1,500–$6,000+
- Structural repair (beam, column, support post): $500–$2,500, often requiring an engineer's sign-off
2. Is it cheaper to bring the work to the shop?
Usually, yes — by 20–40%. Shop work skips travel time and lets the welder use a full-size table, positioners, and better power. If the item is bolted down, welded in place, or too heavy to move safely (gates, railings, fences, structural steel), mobile welding is worth the premium. If you can toss it in a truck bed, take it in.
3. MIG, TIG, or stick — does it matter for my project?
It matters for quality and price, and a good welder will pick for you. As a homeowner, here's the short version:
- MIG: fast and economical — the workhorse for gates, railings, and general steel repair.
- TIG: slower and more expensive (often 1.5–2x the labor), but produces clean, precise welds — the right call for aluminum, stainless steel, and anything visible on finished pieces.
- Stick: rugged and weather-tolerant — common for outdoor structural work and thick steel.
If a welder quotes TIG for a rusty farm gate or stick for a polished stainless handrail, ask why.
4. Can you weld my cast iron / aluminum / stainless piece?
Probably — but not every welder does all three. Aluminum and stainless require different filler material, gas, and technique than plain steel, and cast iron is genuinely tricky (it cracks if heated and cooled incorrectly, so it's often preheated and welded with nickel rod). When you call, name the metal up front. If they hesitate on your material, keep calling around.
5. How long will my project take?
Rough guide from real-world scheduling:
- Simple repairs: 1–3 hours on site, often same-week scheduling
- Custom railing or gate: 1–3 weeks including measuring, fabrication, finish, and install
- Larger structural or decorative projects: 3–8 weeks, especially if powder coating or engineering review is involved
Powder coating alone typically adds 5–10 business days, since most fabricators send it out.
6. Will the weld be as strong as the original metal?
A properly executed weld is typically as strong as or stronger than the surrounding base metal — failures almost always happen next to a bad weld, not through a good one. The caveats: severely rusted metal may be too thin to hold a sound weld (a pro will tell you and may recommend replacing a section), and structural repairs to load-bearing elements should follow code and sometimes an engineer's specification.
7. How do I know a welder is legitimate?
Five things to check before you hand over a deposit:
- Insurance: ask for proof of general liability (a real shop carries $1M+). Welding involves open flame near your property — this is non-negotiable.
- Certifications: AWS (American Welding Society) certification is a strong signal, and it's required for most structural work.
- Photos of comparable work — not just any welds, but projects like yours.
- A written quote listing materials, labor, finish, and timeline.
- Reasonable deposit terms: 30–50% down on custom fabrication is normal; 100% up front is not.
8. Do welding repairs need a permit?
Cosmetic and furniture-type repairs: no. But structural work, new stair railings, fences over a certain height, and anything attached to the dwelling often falls under local building codes — guardrails, for example, generally must be 36–42 inches high and withstand a 200-pound load at the top rail. A reputable local fabricator already knows your county's rules and will build to them, which is one of the best reasons to hire nearby rather than shipping work out.
The bottom line
Welding is one trade where experience shows immediately — in the bead, in the fit, and in how long the repair lasts. If you've got a project in mind, the fastest path to a real number is a quick call or a couple of photos sent to a local welding and fabrication shop. Most will give you a ballpark the same day, and a solid repair almost always costs less than replacing the whole piece.